Changelog
What's new
Last updated: 19 November 2026
Everything that changed in untangle.bio, newest first. Small fixes get one line;
anything that changes how you work gets a short explanation.
18-19 November 2026
Improved
The route list now holds up to 300 routes on paid plans and searches for up to 90 seconds, and routes that work come first: at most 50 places go to routes that failed, the rest are kept for working ones. Free now shows the best 15 routes instead of 10 and can calculate all 15 in detail. Routes whose simulated moving bed a reversed-phase adsorbent cannot separate are now ruled out before they are simulated, which leaves more of the search time for routes that can work.
Fixed
A continuous fermenter with no dilution rate set now gets one designed for its organism and feed: safely below washout, within what the culture can respire and within what the full-size production vessel can actually aerate, counting every cell the broth carries. It used to run a fixed 0.15 per hour, which washed out slower cultures and inflated their cost. Saved plants with a continuous fermenter and no dilution rate will show different costs, much lower for slower cultures such as yeast and fungi. Enter a dilution rate if you want a fixed one.
Fixed
Whole-cell products (yeast, mycoprotein, single-cell protein) with no facility grade set now take it from the organism's food-safety status and risk group. A food-safe microbe is costed as a food-grade plant instead of a GMP pharmaceutical one, so these plants cost noticeably less. Animal cells and organisms without food-safety status stay GMP. A grade you set always wins. Saved plants with a whole-cell product and no grade set will show lower costs when re-run. When a whole-cell product is grown on a stand-in organism, the results now say which one.
Improved
Aerobic fermenters with no setpoint now hold dissolved oxygen at a default for the kind of organism: 20% of saturation for bacteria and yeasts, 30% for filamentous fungi and 40% for animal cells, in line with industrial practice. It used to be 30% for everything. A setpoint you enter still wins.
Improved
Oxygen transfer is judged on the full-size production vessel. The extra oxygen the liquid height pushes into solution is counted, less what the culture has already taken out of the air on its way up, and the air rate stays below the point where the impeller floods. When a thick broth or a high air rate takes the transfer estimate outside the range it was measured on, the cost results now say so. Saved aerobic plants will show a different air rate and aeration power when re-run, and a continuous fermenter whose oxygen supply limits it may get a lower dilution rate, a bigger vessel and a higher cost. When that dilution rate falls far below what the organism can grow at, the results say so, name the feed sugar strength that would raise it and how much smaller a vessel that feed would need for the same sugar throughput; your feed is not changed. When no feed strength raises it, the results say so and point to the vessel's oxygen transfer instead.
Improved
Air compressor power now includes a typical 0.3 bar loss through the sterile filter, sparger and piping, and the losses in the motor, its speed drive and coupling, so aerated plants use a little more electricity. Saved aerobic plants will show a slightly higher electricity cost when re-run, usually well under 1% of production cost. On a bubble column you can enter your own gas path pressure loss; zero gives the old lower bound. The compressor drawn on the plant layout is sized for the same air rate the simulation uses.
Improved
Baker's yeast now grows on its true biomass yield, counting the sugar the cells spend on upkeep once, which matches the 0.48 to 0.51 g per g measured in continuous culture. Filamentous fungi get thinner broth at low cell density, which no longer starves a dilute culture of oxygen. Saved plants that grow aerobic yeast for ethanol with biomass as the priority may now stop with a message that the yield leaves no sugar for ethanol; enter a lower biomass yield to run them. Known model limit: an aerobic batch of the built-in baker's yeast predicts no overflow ethanol, although real yeast makes it. The library grows the yeast at 0.25 per hour, where strains measure 0.38 to 0.45, so it never reaches the rate at which ethanol starts; this is recorded as an open defect in our tests, not as yeast behaviour. Until it is fixed, every aerobic batch or fed-batch fermenter whose organism is known to make an overflow product, charged with more than 0.1 g/L of any carbon source, says that the model did not predict that product and what the overflow model leaves out.
Improved
The fermentation temperature field is blank until you set it and shows the selected organism's own temperature as its hint, which is what the simulation runs. Saved plants with an organism set and no temperature now run at that organism's temperature (for example 30 °C for yeast and fungi), so cooling and maintenance numbers change. With no organism chosen, the vessel keeps its usual temperature and the results say which organism was assumed. The assistant again offers organism, temperature, air rate and dilution rate on fermenters.
Fixed
A fermenter whose feed the simulation works out may now finish up to 2% short of its titer target with a warning instead of stopping. A fixed medium is still held to the tighter limit, and a culture that runs well short, such as an oxygen-limited one, still stops and says why. The warning that a fermenter falls short of the cell density you entered compares against the density you entered again, so it shows where it should. Some saved plants that used to reach their titer may now stop short of it. The usual cause is that the titer you entered, at the yields you entered, needs more cells than the vessel can supply oxygen to, once each cell's upkeep is counted. Entering a death rate or a lower titer runs them. A new cap applies only when a fermenter states a titer, a cell density and a product rate that does not depend on growth: the cells then stop at the density you entered and the rest of the product forms at that rate. On a batch or fed-batch fermenter, a titer the vessel's sugar cannot pay for now stops with the most it could reach: the sugar charged plus any feed, at the yield you entered and after the cells' upkeep, buys less product than the titer asks. Raise the sugar charge or the feed strength, or lower the titer, to run it.
Fixed
A fermenter that states more than the model needs (a titer, a product yield, a cell density and a cell yield together) now works to one plain rule. The product yield you entered binds: every gram of product is charged the sugar your yield says it costs, and the results show the yield the run actually achieved beside it. The cell density you entered binds too, so the rest of the titer has to form after growth stops. The app works out the product rate for that phase and shows it as the derived non-growth product rate. That rate only sets how long the batch runs, never how much sugar the product costs, and it is never faster than the cells made product while growing flat out (beta_max = alpha x mu_max). The slowest rate that reaches the titer is the one used, so the batch time you allow often sets the batch length, the cycle time and the number of vessels. When you have not set a batch time, the results say the app's default limit (200 hours for most products) was used, and that setting a batch time or the strain's own product rate changes it. When no rate reaches the titer, the run stops and the refusal names its cause with a code, such as over_determined_clock when the batch time ran out, along with the one titer it can reach. It names the right fix: a longer batch time when the clock ran out, a measured oxygen uptake rate for the strain when the cells themselves cannot breathe faster, and a higher kLa, oxygen-enriched air or more head pressure only when the vessel cannot transfer enough oxygen. Some saved plants of this kind that used to report a cost now stop with that message, and some run longer batches with a higher cost of goods than before.
Fixed
A culture that has stopped growing because its own product slows it, but still makes product, now keeps running until it approaches the product ceiling instead of stopping a few percent short. Some saved plants with a product ceiling now reach a slightly higher titer, and a few that used to stop with a product inhibition message now run.
Fixed
The fermentation preview now runs the same starting charge as the cost calculation: the seed train's cell density, with the sugar used to grow those cells taken out of the charge. Before, the preview started from a small flask inoculum on the full sugar charge, so its chart could differ slightly from the costed run, and a titer near the sugar limit could be accepted by one and refused by the other.
Fixed
Two rare saved-plant cases now run the way the rest of the app reads them. An organism box holding only spaces counts as no organism, so a host set in the second organism field is used rather than hidden. An animal-cell organism with no culture type set is treated as animal cell culture in the fermentation rates too, as the mass balance already did. Such plants may show a different temperature or animal-cell vessel limits when re-run.
Improved
The impeller tip-speed warning on stirred fermenters now reads its limit from the kind of organism. Filamentous fungi, whose hyphae break up, are held to 5 m/s instead of the 8 m/s used for all microbes before, and plant cells get their own 2 m/s limit, so fungal and plant-cell plants may now show the warning. For bacteria and yeast the 8 m/s limit is a mechanical one (seals, gearbox wear and foaming), not damage to the cells, and the warning now says so and asks you to check the drive, seal and foam control. The results also show the aeration electricity per kg of oxygen the culture takes up, in the preview's utilities and in the results, with a note when it falls outside the roughly 0.5 to 3 kWh per kg typical of stirred fermenters. Where the fermenter works out its own product rate, the preview now shows that rate too. None of this changes the design or the cost.
New
The route list can now calculate routes in detail. Tick up to 20 routes (10 on Free), or calculate the top ones, and each is put on your plant and the whole plant evaluated, exactly as Put on canvas would. Rows fill in one by one and you can stop at any time. A Numbers switch shows the rough or the detailed numbers; the rough ones are kept either way. A plot above the table compares the routes on any two fields and marks the ones no other route beats on both. Hover or select a point and its row lights up, and the other way round. It works by keyboard too. If your design campaign locks a step the list would replace, the list tells you when you start it rather than when you place a route; unlock that step to list routes there.
Fixed
Solvent recovery on the canvas now bills the recovered solvent as make-up for what the loop loses, not as wastewater. Plants with a solvent recovery loop will show a lower cost of goods than before. A recovery step whose solvent nothing else in the plant uses is billed as liquid effluent with no make-up, and the cost card says why.
Fixed
The route list no longer shows a rough cost for a route the canvas would refuse to cost, such as a membrane step that needs more than 100 parallel machines. The row says why instead.
Improved
Stopping a route list and generating again only makes you wait when someone else is waiting for a slot. If the server does ask you to wait, the list keeps its rows and the Generate button counts down until you can try again.
Improved
Placing a route now checks that the list was made for the plant as it is now. If you had the app open before this release, reload the page before placing a route from the list.
Fixed
Route numbers in the list match the order shown, and placing a second route no longer leaves pins on units that were removed.
Fixed
Route lists for a dried crystalline product could show no runnable routes even when the search had found good ones. The quick check judged every dryer at 5% water, ignoring the moisture the dryer was set to. It now reads the dryer's own setting.
10 September 2026
Fixed
Fermenter cooling now appears in the energy table and utility costs, using the sized working volume. Electricity estimates also account for the agitation power whose heat must be removed.
Fixed
UF and NF account for osmotic pressure when checking whether permeation is possible, and membrane distillation checks its vapour-pressure driving force. Distillation recovery is limited by available stages, and reflux affects sizing and energy use.
Notice
Correction to the 3–6 September notes: the 3D pipe collision-routing update was rolled back. The earlier claim that pipes avoid equipment and each other no longer describes the current release.
9 September 2026
New
Add a compound from PubChem directly in the fermentation medium step. It is saved to My Molecules and added to your medium; your existing custom molecules also appear in the picker.
Improved
The start wizard now offers Explore routes only. Goal mode has been taken offline.
8 September 2026
Improved
Fermentation setup shows how biomass and product yields constrain each other, with clearer feedback on infeasible values. Estimated yields remain editable, and the fermentation preview stays available while routes generate.
The medium step identifies the nitrogen sources the model can use: ammonia, ammonium
sulfate and ammonium chloride. Other nitrogen ingredients remain in the broth, but are
labelled as unsupported for nitrogen uptake.
New
Flowsheet results now include thermodynamic assessments for supported gas, crystallization and electrolyte conditions, with model limits and reasons when a state cannot be evaluated.
These are bounded assessments alongside the simulation. They do not imply a validated
equilibrium model for every broth or mixture.
Improved
Route generation runs one 2,000-candidate pass and shows results as candidates finish, including when continuing from the canvas.
Fixed
Applying a generated route preserves its product source assignments, and vapour outlets can connect to Vent nodes.
Fixed
Cloud saves ask you to review an overwrite and report save conflicts. If the project list cannot load, you can retry or download a file.
7 September 2026
Improved
Manual flowsheets tie each Product node to its upstream source and physical outlet, so recovery and purity follow the stream you actually deliver.
Fixed
New feed streams start blank, and cancelling the feed dialog leaves no node behind. Click-to-connect and keyboard authoring use the same connection checks as dragging.
3–6 September 2026
New
Monte Carlo on the TEA. Every assumption the tornado swept one at a time is now drawn together, with P10, P50 and P90 tiles, a histogram and a ranking of what moves the number most.
Tariffs move together, feedstock price moves with the price level, recoveries share a common
mode, and one global capex factor spans the AACE class 4/5 band. Each draw is a full route
simulation plus detailed TEA. Draws that cannot run are excluded and counted, not hidden.
Behind the same plan as sensitivity analysis.
New
Eight palette operations: pH-swing back-extraction, adsorption with elution, alkaline lysis, biomass digestion for intracellular granules, inclusion-body refold, molecular-sieve dehydration, pH adjustment and reagent dosing.
These are the steps the generator could not express before. Penicillin, erythromycin,
vitamin B12, PHB and E. coli insulin routes now simulate end to end, and fuel ethanol can
pass the water azeotrope a distillation column stops at. Titrant, reagent and eluent demand
is billed on both cost tiers.
Improved
The generator shows what it is doing. A real progress bar counts genome evaluations, Cancel works, and a running tally says how many candidates were discarded and why.
Improved
Generated routes are more honest about physics. Streams carry a phase, crystallisers and precipitators emit one magma, membranes retain by phase and molecular weight, ion exchange binds on net charge, and a disposal stream is never forwarded or sold.
Routes are scored on what a plant sells: spec distance per target, a capital charge per step
and a Pareto front on cost against purity. A liquid target no longer crystallises, single-cell
protein is a powder at every grade, and starch is insoluble.
New
General arrangement export from the 3D plant: a scaled plan drawing, equipment schedule, line list and check register, with an AACE title block on every page.
Improved
Equipment tags (F-101) and line numbers (80-PR-1001) on every label in the 3D view, hidden by default. Hygienic routing screening flags slope, pockets and dead legs, and findings can be accepted, resolved or reopened.
Improved
Pipes route around equipment and each other. Shared pipe volumes are validated, external piping splits at pump ports, and connections the router could not resolve are shown rather than drawn through a vessel.
Improved
Optional profiled-steel cladding walls in the 3D view, off by default, with a concrete kerb marking the hall footprint either way.
Improved
The palette's stream sources and sinks and the start wizard's cards use the same line-art icons as the unit operations. Dry product leaves in a big bag, liquid product in a drum.
Improved
The cost model is the one the benchmark page was measured on, and the benchmark itself is published from the docs: 64 published TEAs, with the literature corpus behind it grown from 185 to 500 open-access papers.
Fixed
Nothing floats in the 3D plant. Pumps, cabinets, condensers, handrails and stair treads that hung in the air now stand on what carries them, and nozzle stubs reach the machine they belong to.
Fixed
The inclusion-body refold step crashed on its own canonical feed and had no saturation limit. Both are fixed.
New
Walk your plant. The 3D view now has a first-person mode at 1.70 m eye height, WASD movement and Blender-style orbit, with sky, shadows and translucent building shells you can step through.
Forty-seven equipment families are drawn as the machines they actually are, with their own
nozzles, supports, pumps and valves. Pipes route around the plant instead of through it,
storage form follows the product phase, and the drawn machines reconcile with the ones the
cost model bills, so the layout you look at is the plant you paid for.
Improved
The Start Here wizard assumes an extracellular product instead of asking on every product pick, and the fermentation preflight now says why it refused.
Improved
Wastewater treatment is inside the cost basis, vessels are sized by one sizer everywhere, and GMP-grade downstream capital is priced as GMP.
Fixed
The toolbar stayed reachable only at some interface scales. It no longer scrolls out of view.
Fixed
A node with no operation type, or a stream with no pH in pH view, blanked the whole workspace. Both now draw.
31 August 2026
New
Export your flowsheet as a 3D plant layout. Every unit operation gets real equipment geometry, a plot plan and drawn nozzles, with an in-app plan editor. Free for everyone while it is in early access.
New
Membrane distillation joins the palette.
New
The Untangle Universe, a browsable map of how the tool works under the hood, now with a molecule layer. Linked from the docs.
Improved
A pass over the whole interface: clearer palette, redrawn icons, tidier dialogs, calmer canvas selection and reworked view settings. Wizard navigation is pinned below the content instead of scrolling away.
Fixed
Open Project showed the site owner every user's projects. It now shows only your own.
27–29 August 2026
New
Share a flowsheet by link. Anyone with the link gets a read-only view and can clone it into their own account.
New
Continue from the canvas. Edit a generated flowsheet, then generate again from what you drew rather than starting over.
New
See your streams, not just your boxes. A canvas toggle colours the flowsheet by flow, temperature, pH or enthalpy.
New
Reactions are first-class: a multi-reaction table, an enzyme catalogue with every enzyme variable editable, and inhibition and deactivation on the enzyme itself.
Every reaction carries its chemistry provenance, and the atom balance is closed per element
through the conversion reactor and the fermenter alike, with CO2, O2
and ammonia in the database and biomass on its real C-mol composition. An enzyme with no
price no longer quietly inherits cellulase's.
New
pH is a computed duty. Set your setpoints and the titrant demand, and its cost, follow from them.
New
Nine more cheap fermentation substrates, molasses, corn steep liquor, bio-oil and pea protein among them.
New
Appearance preference with two era skins: Workstation '95 and Terminal '85.
Improved
Every capex line now carries the year its cost basis comes from, and consumables scale with the plant instead of sitting flat.
Improved
A purification-only run now asks where the product sits in the feed, and which host cell it came from, instead of guessing.
Fixed
Applying a generated route left some unit operations unconnected on the canvas, the gravity thickener and the other two-outlet operations in particular.
Fixed
Superseded pseudo-components still appeared in the molecule picker. They are hidden now that mixtures replace them.
25–26 August 2026
New
Print a dossier. An assumptions register, the full capital ladder, itemised operating costs, a year-by-year cash flow, the warnings that applied and a run id you can cite.
New
Save a mixture of molecules once and reuse it, either as the feed you are separating or as the fermentation medium.
New
Fourteen unit operations join the palette, taking it from 38 to 52.
Cell disruption, a conversion reactor with kinetic and equilibrium modes, a pasteurizer,
wastewater treatment as a terminal sink, membrane chromatography with its own cost path,
the continuous solid/liquid filtration cluster (filter press, rotary vacuum drum, belt
filter, decanter centrifuge) and six more solids operations, each with the refusal walls
that tell you when it does not apply.
Improved
The wizard asks for the medium before the product, and you can build a mixture there without leaving the step.
Improved
In a multi-product broth every product now has its own yield and its own titer ceiling, instead of the titer being split evenly.
Improved
The capital model is defensible at both ends of the scale range, and the cash flow runs on one definition of minimum selling price.
Fixed
Cost of goods is divided by the product mass the balance actually delivers, not by what the flowsheet declares.
Fixed
Chromatography columns are sized and billed on the load each one sees, buffer volumes are coupled to the bed, and liquid-liquid extraction pays for its solvent.
Fixed
Malformed input is refused out loud, with the offending field named, instead of producing a silent number.
Fixed
Informational fermentation notes are labelled as such, so a healthy node no longer looks like a warning.
19–24 August 2026
New
Thorough mode is public. A rigorous simulation pass that respects the branches you drew, end to end, and feeds the economics.
New
Recycle loops are priced into the economics rather than ignored.
New
Plans and billing. Free, Academic and Pro, with subscriptions, a pricing page, and usage meters for runs, saved projects and custom molecules on your account page.
New
Build your own production host. Set the organism's kinetics yourself, or start from the library's real numbers.
The bioreactor gained selectable growth kinetics (Monod, Haldane-Andrews, Contois),
chemostat mode measured in residence times, exponential feeding, a model-decided harvest,
a thermodynamic yield ceiling, heating and cooling duty that is charged correctly, and a
per-batch scale-up report. The panel and the mass balance run one fermentation, so the
chart and the cost agree.
New
Filter your generated routes and the charts rescale onto the subset. You can also keep specific unit operations out of the search before you generate.
Improved
The properties panel collapses to a strip on the right edge and opens itself when you select something.
Improved
The docs now cover Thorough mode, recycle loops, fermentation, Optimize and the export formats.
Improved
Per-operation capex lands within 50% of published values, and the membrane, chromatography, crystallisation and drying equations were corrected.
Improved
Generating routes simulates the pinned fermentation once instead of once per candidate, so runs finish faster.
Fixed
Process water was billed as a $5/kg raw material.
Fixed
Repeated copies of the same unit operation claimed each other's costs.
Fixed
Saved results survive a reload, and going back to results no longer lands you on a stale canvas.
Fixed
A PubChem rate limit is now told apart from a compound that genuinely has no record.
16–18 August 2026
New
Every generated route now comes with a cost-of-goods estimate: dollars per kg of pure product, next to yield and purity.
The route charts plot it too. COGS sits on a log axis so a $5/kg route and a
$500/kg route both stay readable, and dot size ranks routes by cost while
results stream in, so the cheap ones stand out at a glance.
New
Add molecules straight from PubChem. Search by name in the molecule picker and its properties are pulled in automatically.
New
Choose your own units and currency on your account page. The app displays results the way you work.
Improved
The bioreactor now simulates fermentation over time: growth, oxygen transfer and product inhibition together decide the titer you get, instead of a fixed number you type in.
You watch the fermentation run as it happens, kLa is derived from your agitation
and aeration settings rather than asked for directly, and the Start New Process
wizard runs a fermentation preflight so route generation starts from a broth
that is actually achievable.
Fixed
Undo and redo on the canvas now work reliably.
Fixed
Going back to your generated results after opening a route restores the list cleanly, and the canvas survives navigating between pages.
Fixed
Dark mode: dropdowns, checkboxes and the file picker now follow the theme instead of staying bright white.
Improved
The toolbar file buttons (new, open, save, export) got clearer icons that show the action.
15 August 2026
Improved
Number fields accept a decimal comma. Typing 1,5 now means 1.5.
Fixed
Numeric inputs across the app could not be cleared, and lost the decimal point while you were still typing.
Fixed
A feed stream with molecules in it looked identical to an empty one on the canvas.
Fixed
Molecule search in the feed stream dialog only looked inside the open tab, so molecules in other families never showed up.
Fixed
The wash water inlet icon on filtration units had no matching connection point.
New
Techno-economic snapshots on 20 molecule pages in the resource library.
New
Expert rules now flag capacity walls that buying more equipment does not remove.
Some limits are physical, not budgetary: an osmotic pressure ceiling or a packing limit
does not go away when you add a second membrane skid. Routes that hit one are now
called out instead of being silently scaled up.
13–14 August 2026
New
Export a run as CSV or a printable report, straight from the toolbar.
New
Goal seek: set a target cost per kg and let the tool find the route, or tell you what would have to be true to get there.
If no combination of the parameters you allowed reaches your target, you get the
gap and the binding constraint rather than a failure message.
New
Tornado charts for operating levers and assumption risk, so you can see which input actually moves the cost.
New
Accounts and cloud projects. Projects are saved to your account instead of only living in the browser, and there is a dedicated account page.
Fixed
Selectivity is now calculated on a mass basis, and dense-membrane rejection follows the right physics.
Fixed
Products made in a bioreactor kept a generic identity instead of picking up their real properties from the molecule database.
1–4 August 2026
New
The Optimize button replaces Recalculate: pick an objective (yield, purity, cost of goods, CAPEX and five more) and search the parameters of your flowsheet against it.
The search only moves parameters you would actually change in a plant. Calibration
constants stay fixed, and capital is capped on non-economic objectives so you do not
get a 99% yield route that costs twenty million to build.
New
Bioreactor lets you choose the substrate and set the titer directly, instead of inferring both.
New
The MCP server returns mermaid flowsheets, deep links into the canvas, and PNG charts, so assistants can hand you something you can open.
Improved
Filtration concentration limits are physics-based, and filtration cost now follows the flow through the unit rather than a fixed size.
Improved
The optimizer says when it is finished and what it changed, instead of stopping quietly.
Fixed
Water solubility for several molecules was stored in mg/L and read as g/L, a factor of 1000. Seven n-alcohols added while fixing it.
Fixed
Bioreactors appeared in purification-only route searches.
Fixed
Five silent failures in the canvas where an action did nothing and said nothing.
Fixed
Unreadable white text on the lime buttons.
27–31 July 2026
New
Public pricing: $75 per month or $600 per year, both billing periods shown side by side.
Fixed
Several unit-operation design rules never fired, or measured the wrong quantity when they did.
Older changes are not listed. Something broken or missing?
Get in touch.